Sinf I+ Sinf II / 1+ toifa 2 toifa kuchlanishdan himoya qiluvchi qurilma (SPD)

Prosurge’s Type 1 + Type 2 Surgeani himoya qilish qurilmalari (SPDs) are designed to discharge high current surges without any destruction of the installation.

This surge protective device is characterized by its capacity to withstand impulse current with 10/350µs waveform which simulates direct impact coming from a natural lightning current.

Prosurge Type 1 + Type 2 (class I + Class II)  SPDs are placed at the entrance point of the installation, in the main distribution board for a global protection of this installation.

Prosurge also provides Class I + Class II, Type 1 + Type 2 SPD with different technology of spark gap technology, VT technology and MOV technology.

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

MOV texnologiyasi -12.5kA 10/350 - TUV sertifikati

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

MOV texnologiyasi - 25kA 10/350 - TUV sertifikati

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

Class II / Type 2 (also tested to class I + Class II, T1 +T2) Surge Protection Device (SPD)

Prosurge Type 2 Surgeani himoya qilish qurilmalari (SPDs) are also tested to Type 1 + Type 2 with impulse current 10/350µs.

It is designed to discharge high current surges without any destruction of the installation. This surge protective device is characterized by its capacity to withstand impulse current with 10/350µs waveform which simulates direct impact coming from a natural lightning current. Prosurge Type 2 SPD (also T1 + T2) SPDs are placed at the entrance point of the installation, in the main distribution board for a global protection of this installation.

Reyting:

  • Uc range: 75Vac to 750Vac
  • Imax: 50kA 8/20
  • Iimp: 7.5kA 10/350
  • Various SPD configuration: 1+1, 2+0, 3+0, 3+1 SPD

Sinf II / toifa 2 soxta himoya qurilmasi (SPD)

Prosurge Class II/T2 surge protective device is designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher.

  • KEMA certified Class II/T2 SPD per IEC/EN 61643-11.
  • UL certified Type 1ca SPD per UL1449 5th edition (pass SCCR test 200kArms)
  • 40kA 8 / 20simgacha bo'lgan yuqori oqim quvvati oqimi hajmi
  • High reliability due to global patented thermally protected MOV with reliable arc-extinguish (TPAE) technology.
  • Oson o'zgartirish uchun ulangan modul
  • Degradation indication and remote signal contact.
  • Comply with IEC/EN 61643-11, UL1449 5th, CSA C22.2 etc standards

III sinf / 3 toifadagi kuchlanishdan himoya qilish moslamasi (SPD)

Prosurge T3 Surge Protection Device (SPD) is designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 2-3 and higher.

Ular himoya qilish uchun sezgir jihozlardan iloji boricha yaqinroq o'rnatilishi kerak. 1,2 / 50 - 8/20 oqim kombinatsiyalangan to'lqin generatori bilan sinovdan o'tgan, ular kuchlanish darajasining juda pastligini ta'minlaydi.

  • Comply with IEC 61643-11 and UL1449 5th
  • Taklifli dizayni, hech qanday vositasiz oson almashtirildi.
  • High Discharge Capacity with 8/20 us waveform, Imax 10kA to 25kA 8/20
  • Termal ajratish qurilmasi tufayli yuqori ishonchlilik
  • Vizual holat ko'rsatkichi va masofadan turib uzatish aloqasi mavjud
  • Mono block type for single phase and three phase configuration are available

PCB Mounting SPD – Pluggable while install with soldering socket

The PCB mounting surge protective device is easy untegrated in PCB and close to sensitive electronic element inside device, to minimize the potential impact of lightning events. The PCB mounting SPD will help to significantly reduce the cost of substantial repair, replacement, system downtime and the loss of revenue.

Prosurge’s PCB mounting SPD is size optimization and space efficiency, which is a high performance but low cost solution for the industry of power electronics. It employs high energy Metal Oxide Varistor (MOV), and constructed with patented thermal protection and arc extinguishing technology which ensure safe disconnection while faulty current or abnormal voltage happened. Prosurge PCB mounting SPDs have comprehensively improved the safety performance and proven to be excellent fail-safe and self-protected protective devices because of patented technology.

  • Reyting:
    • AC ilovasi uchun: Maks. Uzluksiz ish kuchlanishi (MCOV): 75 ~ 750Vac
    • DC/PV ilovasi uchun: Maks. Ruxsat etilgan doimiy kuchlanish (Vpvdc): 48-825Vdc
    • Surge capacity (8/20 μs):50kA ~ 80kA
    • Impulse current (10/350 μs): 7.5kA ~ 12.5kA
    • SCCR(UL1449 5th):up to 200kA – tested without external CB or fuse
    • Iscpv (IEC61643-31):1000A
  • UL tomonidan tan olingan 1ca SPD turi (ANSI/UL1449 5-chi), 2ca tipi SPD (CSA-C22.2 )
  • TUV certified as per IEC 61643-31 standard
  • Yong'in söndürme qurilmasiga ega bo'lgan maxsus termal ajratgich dizayni tufayli tez issiqlik bilan javob berish va mukammal elektron chiqib ketish funktsiyasi
  • Keng ish haroratining diapazoni va yuqori ishonchliligi
  • Yuqori kuchlanish oqimi quvvati va past oqim oqimi
  • PVD_Base ning qo'shimcha foydalanishida yoriq ko'rsatkichi uchun masofadan turib uzatish aloqasi

Progressive Surge Protection Device Products oilasi

Keng qamrovli zo'riqishdan himoya qilish uskunalarini va boshqa chaqmoqlarni himoya qilish vositalarini o'rganish uchun bosing.

Prosurge bilan bog'laning va 2 soat ichida javob oling

narximizning raqobatbardoshligini qarang:)

Pastki o'ng burchakdagi suhbat tugmasini bosish orqali biz bilan suhbatlashing

Kontakt shaklini to'ldiring va 2 soatda javob oling





Shimoliy Amerika bozoriga murojaat qiling

+ 86 757 8632 7660

Boshqa bozorlar uchun murojaat qiling

+ 86 757 8632 7660