Class I+ Class II / Type 1+ Type 2 Surge Protection Device (SPD)

Prosurge’s Type 1 + Type 2 Mga Device sa Proteksyon ng Surge (SPDs) are designed to discharge high current surges without any destruction of the installation.

This surge protective device is characterized by its capacity to withstand impulse current with 10/350µs waveform which simulates direct impact coming from a natural lightning current.

Prosurge Type 1 + Type 2 (class I + Class II)  SPDs are placed at the entrance point of the installation, in the main distribution board for a global protection of this installation.

Prosurge also provides Class I + Class II, Type 1 + Type 2 SPD with different technology of spark gap technology, VT technology and MOV technology.

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

MOV Technology -12.5kA 10/350 – TUV Certified

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

MOV Technology – 25kA 10/350 – TUV Certified

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

Class II / Type 2 (also tested to class I + Class II, T1 +T2) Surge Protection Device (SPD)

Prosurge Type 2 Mga Device sa Proteksyon ng Surge (SPDs) are also tested to Type 1 + Type 2 with impulse current 10/350µs.

It is designed to discharge high current surges without any destruction of the installation. This surge protective device is characterized by its capacity to withstand impulse current with 10/350µs waveform which simulates direct impact coming from a natural lightning current. Prosurge Type 2 SPD (also T1 + T2) SPDs are placed at the entrance point of the installation, in the main distribution board for a global protection of this installation.

Marka:

  • Uc range: 75Vac to 750Vac
  • Imax: 50kA 8/20
  • Iimp: 7.5kA 10/350
  • Various SPD configuration: 1+1, 2+0, 3+0, 3+1 SPD

Uri ng II / Uri ng 2 Surge Protection Device (SPD)

Prosurge Class II/T2 surge protective device is designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher.

  • KEMA certified Class II/T2 SPD per IEC/EN 61643-11.
  • UL certified Type 1ca SPD per UL1449 5th edition (pass SCCR test 200kArms)
  • Mataas na paggulong ng kasalukuyang kapasidad ng paglabas hanggang sa 40kA 8 / 20μs
  • High reliability due to global patented thermally protected MOV with reliable arc-extinguish (TPAE) technology.
  • Pluggable module para sa madaling kapalit
  • Degradation indication and remote signal contact.
  • Comply with IEC/EN 61643-11, UL1449 5th, CSA C22.2 etc standards

Class III / Type 3 Surge Protection Device (SPD)

Prosurge T3 Surge Protection Device (SPD) is designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 2-3 and higher.

Ang mga ito ay mai-install nang malapit hangga't maaari mula sa sensitibong kagamitan upang maprotektahan. Nasubukan sa isang 1,2 / 50 - 8/20 kasalukuyang kombinasyon ng alon generator, tinitiyak nila ang isang napakababang halaga ng antas ng boltahe ng proteksyon.

  • Comply with IEC 61643-11 and UL1449 5th
  • Ang disenyo ng pluggable, madaling mapapalitan nang walang anumang mga tool.
  • High Discharge Capacity with 8/20 us waveform, Imax 10kA to 25kA 8/20
  • Mataas na pagiging maaasahan dahil sa thermal disconnection device
  • Ang pahiwatig ng katayuan ng visual at remote na contact ng signal ay magagamit
  • Mono block type for single phase and three phase configuration are available

PCB Mounting SPD – Pluggable while install with soldering socket

The PCB mounting surge protective device is easy untegrated in PCB and close to sensitive electronic element inside device, to minimize the potential impact of lightning events. The PCB mounting SPD will help to significantly reduce the cost of substantial repair, replacement, system downtime and the loss of revenue.

Prosurge’s PCB mounting SPD is size optimization and space efficiency, which is a high performance but low cost solution for the industry of power electronics. It employs high energy Metal Oxide Varistor (MOV), and constructed with patented thermal protection and arc extinguishing technology which ensure safe disconnection while faulty current or abnormal voltage happened. Prosurge PCB mounting SPDs have comprehensively improved the safety performance and proven to be excellent fail-safe and self-protected protective devices because of patented technology.

  • Marka:
    • Para sa AC application: Max. Patuloy na operating voltage (MCOV): 75~750Vac
    • Para sa aplikasyon ng DC/PV: Max. Pinahihintulutang DC Boltahe (Vpvdc): 48-825Vdc
    • Surge capacity (8/20 μs):50kA ~ 80kA
    • Impulse current (10/350 μs): 7.5kA ~ 12.5kA
    • SCCR(UL1449 5th):up to 200kA – tested without external CB or fuse
    • Iscpv (IEC61643-31):1000A
  • Kinikilala ng UL ang Type 1ca SPD (ANSI/UL1449 5th), Type 2ca SPD (CSA-C22.2 )
  • TUV certified as per IEC 61643-31 standard
  • Mabilis na tugon ng thermal at perpektong circuit cut-off function dahil sa espesyal na thermal disconnector disenyo na may arc extinguishing device
  • Malawak na hanay temperatura ng operating at mataas na pagiging maaasahan
  • Mataas na surge kasalukuyang kapasidad at mababang tagas kasalukuyang
  • Lumulutang na remote signaling contact para sa indication ng kasalanan habang ang mga karagdagang paggamit ng PVD_Base

Mga Produktong Proteksyon ng Produkto ng Prosurge Surge Pamilya

I-click upang galugarin ang aming malawak na proteksyon ng mga aparato at iba pang mga produkto ng proteksyon ng kidlat.

SPD para sa Sistema ng Impormasyon

SPD para sa Ethernet

SPD for datalines (UL497b)

SPD para sa Video

SPD for Coaxial

Iba pang Mga Produkto ng Proteksyon ng Surge at Lightning

Surge Counter

Surge Monitor

Lightning Equipotential Bonding

Mga Produktong Proteksyon ng Produkto ng Prosurge Surge Pamilya

I-click upang galugarin ang aming malawak na proteksyon ng mga aparato at iba pang mga produkto ng proteksyon ng kidlat.

Makipag-ugnay sa Prosurge at Kumuha ng Sumagot sa 2 Oras

tingnan kung gaano mapagkumpitensya ang aming presyo ay:)

Live chat sa amin sa pamamagitan ng pag-click sa pindutan ng chat sa kanang sulok sa ibaba

Punan ang Contact Form at Kumuha ng Sumagot sa 2 Oras





Para sa North American market, mangyaring makipag-ugnay

+ 86 757 8632 7660

Para sa iba pang mga merkado, mangyaring makipag-ugnay

+ 86 757 8632 7660