Class I+ Class II / Type 1+ Type 2 Surge Protection Device (SPD)

Prosurge’s Type 1 + Type 2 Dispozitive de protecție împotriva supratensiunii (SPDs) are designed to discharge high current surges without any destruction of the installation.

This surge protective device is characterized by its capacity to withstand impulse current with 10/350µs waveform which simulates direct impact coming from a natural lightning current.

Prosurge Type 1 + Type 2 (class I + Class II)  SPDs are placed at the entrance point of the installation, in the main distribution board for a global protection of this installation.

Prosurge also provides Class I + Class II, Type 1 + Type 2 SPD with different technology of spark gap technology, VT technology and MOV technology.

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

MOV Technology -12.5kA 10/350 – Certificat TUV

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

MOV Technology – 25kA 10/350 – Certificat TUV

Class-1-2-Type-1-2-SPD_triggered-spark-gap-technology-Prosurge-258×212

Class II / Type 2 (also tested to class I + Class II, T1 +T2) Surge Protection Device (SPD)

Prosurge Type 2 Dispozitive de protecție împotriva supratensiunii (SPDs) are also tested to Type 1 + Type 2 with impulse current 10/350µs.

It is designed to discharge high current surges without any destruction of the installation. This surge protective device is characterized by its capacity to withstand impulse current with 10/350µs waveform which simulates direct impact coming from a natural lightning current. Prosurge Type 2 SPD (also T1 + T2) SPDs are placed at the entrance point of the installation, in the main distribution board for a global protection of this installation.

Rating-ul:

  • Uc range: 75Vac to 750Vac
  • Imax: 50kA 8/20
  • Iimp: 7.5kA 10/350
  • Various SPD configuration: 1+1, 2+0, 3+0, 3+1 SPD

Class II / Type 2 Surge Protection Device (SPD)

Prosurge Class II/T2 surge protective device is designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher.

  • KEMA certified Class II/T2 SPD per IEC/EN 61643-11.
  • UL certified Type 1ca SPD per UL1449 5th edition (pass SCCR test 200kArms)
  • Capacitate ridicată de descărcare a curentului de supratensiune până la 40kA 8 / 20μs
  • High reliability due to global patented thermally protected MOV with reliable arc-extinguish (TPAE) technology.
  • Modul plug-in pentru înlocuirea ușoară
  • Degradation indication and remote signal contact.
  • Comply with IEC/EN 61643-11, UL1449 5th, CSA C22.2 etc standards

Class III / Type 3 Surge Protection Device (SPD)

Prosurge T3 Surge Protection Device (SPD) is designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 2-3 and higher.

They shall be installed as close as possible from the sensitive equipement to protect. Tested with a 1,2/50 – 8/20 current combination wave generator, they ensure a very low protection level voltage value.

  • Comply with IEC 61643-11 and UL1449 5th
  • Pluggable design, easy replaced without any tools.
  • High Discharge Capacity with 8/20 us waveform, Imax 10kA to 25kA 8/20
  • High reliability due to thermal disconnection device
  • Visual status indication and remote signal contact available
  • Mono block type for single phase and three phase configuration are available

Montare PCB SPD – Conectabil în timpul instalării cu priză de lipit

The PCB mounting surge protective device is easy untegrated in PCB and close to sensitive electronic element inside device, to minimize the potential impact of lightning events. The PCB mounting SPD will help to significantly reduce the cost of substantial repair, replacement, system downtime and the loss of revenue.

SPD-ul de montare pe PCB de la Prosurge este optimizarea dimensiunii și eficiența spațiului, care este o soluție de înaltă performanță, dar cu costuri reduse pentru industria electronicii de putere. Utilizează varistor cu oxid de metal de înaltă energie (MOV) și este construit cu protecție termică brevetată și tehnologie de stingere a arcului, care asigură deconectarea în siguranță în timp ce se produce un curent defect sau o tensiune anormală. SPD-urile cu montare pe PCB Prosurge au îmbunătățit în mod cuprinzător performanța de siguranță și s-au dovedit a fi dispozitive de protecție excelente, sigure și autoprotejate, datorită tehnologiei brevetate.

  • Rating-ul:
    • Pentru aplicație AC: max. Tensiune de funcționare continuă (MCOV): 75~750Vac
    • Pentru aplicație DC/PV: Max. Tensiune DC permisă (Vpvdc): 48-825Vdc
    • Capacitate de supratensiune (8/20 μs): 50kA ~ 80kA
    • Curent de impuls (10/350 μs): 7.5 kA ~ 12.5 kA
    • SCCR(UL1449 5th):up to 200kA – tested without external CB or fuse
    • Iscpv (IEC61643-31):1000A
  • SPD de tip 1ca recunoscut UL (ANSI/UL1449 al 5-lea), SPD de tip 2ca (CSA-C22.2)
  • Certificat TUV conform standardului IEC 61643-31
  • Răspunderea termică rapidă și funcția perfectă de întrerupere a circuitelor datorită designului special de separare termică cu dispozitiv de stingere a arcului
  • Domeniu larg de temperatură de funcționare și fiabilitate ridicată
  • Capacitate mare de curent de supratensiune și curent scăzut de scurgere
  • Suport plutitor de semnalizare la distanță pentru indicarea defecțiunilor în timp ce utilizările suplimentare ale PVD_Base

Prosurge Surge Protector Device Device Familie

Faceți clic pentru a explora dispozitivele noastre extinse de protecție împotriva supratensiunii și alte produse de protecție împotriva trăsnetelor.

DIN-șină SPD pentru alimentarea cu curent alternativ

Standardul IEC

Clasa I SPD

Clasa II SPD

Clasa III SPD

Standardul UL

UL Listed Type 1 SPD

SPD pentru sistemul informatic

SPD pentru Ethernet

SPD for datalines (UL497b)

SPD pentru video

SPD pentru coaxial

Alte produse de protecție împotriva supratensiunii și a trăsnetului

Contor de supratensiuni

Monitor de supratensiune

Combinația echipotențială cu fulgere

Prosurge Surge Protector Device Device Familie

Faceți clic pentru a explora dispozitivele noastre extinse de protecție împotriva supratensiunii și alte produse de protecție împotriva trăsnetelor.

Contactați Prosurge și obțineți răspunsul în 2 ore

a vedea cât de competitiv este prețul nostru:)

Vorbiți direct cu noi făcând clic pe butonul de chat din colțul din dreapta jos

Completați formularul de contact și primiți răspuns în orele 2





Pentru piața din America de Nord, vă rugăm să contactați

+ 86 757 8632 7660

Pentru alte piețe, vă rugăm să contactați

+ 86 757 8632 7660